FROM CMR RACING PRODUCTS INC.
CMR REPLICA HARRIS YAMAHA TZ350-F/G, GP LOWLINE
SPECIAL circa 1980, FRAME/SWING-ARM AND
GAS-TANK KIT: SPEC. SHEET AND PRICE LIST 2008.
MAIN FRAME AND SWING ARM COMPLETE:
MANUFACTURED FROM CHROME-MOLY 4130 TUBE USING TIG AND MIG WELDING. DELIVERED IN UNPAINTED FORM.
MAIN FRAME INCLUDES THE FOLLOWING:
- STEERING HEAD TAPER ROLLER BRGS TO FIT YAMAHA TZ FORK STEM,
- FRONT ENGINE MOUNTING BOLTS AND NUTS IN 8MM H.T. STEEL,
- REAR ENGINE MOUNTING BOLT & NUT IN 10MM H.T. STEEL WITH ALUMINUM SPACERS AND SILENTBLOC BUSHINGS,
- FRONT MONOSHOCK MOUNTING HARDWARE,
- ALL SEAT MOUNT, RAD MOUNT, COIL MOUNT HARDWARE SUPPLIED IN H.T. METRIC SOCKET HD CAPSCREWS,
- (OPTIONAL COST) FOOTREST MOUNTING PLATES, FOOTRESTS AND BRAKE LEVER (ALL MADE FROM ALUM 6061-T6), AND LINKAGE TO REAR MASTER CYLINDER,
- (OPTIONAL COST) FRONT FAIRING/TACH MOUNT/WATER TEMP BRACKET,
- (OPTIONAL COST) 2 REAR FAIRING BRACKETS, PLUS ONE WINDSHIELD BRACKET
SWING ARM ASSEMBLY COMPLETE:
MANUFACTURED IN THE SAME WAY AS ABOVE.
SWING ARM INCLUDES THE FOLLOWING:
- SWING ARM PIVOT BOLT & NUTS IN H.T. STEEL,
- SWING ARM PIVOT BEARINGS INSTALLED, 2- COMBINATION NEEDLE ROLLER/THRUST BALL BEARINGS,
- REAR MONOSHOCK MOUNTING HARDWARE KIT,
- REAR WHEEL AXLE BOLT (IN H.T. STEEL) AND NUT ASSEMBLY INC. SPACERS AND WHEEL ADJUSTER BLOCKS IN 6061-T6. ALUMINUM (SEELEY STYLE),
- (OPTIONAL COST) MOUNTING BRACKET TO FIT STOCK REAR CALIPER (MOUNTED UNDERNEATH SWING ARM), INCLUDING TORQUE ARM AND SPHERICAL ROD-END JOINTS.
MAIN FRAME AND SWING ARM ASSEMBLIES AS LISTED ABOVE:
PRICE CAN.$3500.00 PLUS APPLICABLE TAXES & SHIPPING.
ALUMINUM GAS TANK ASSEMBLY
MADE FROM 5052 MARINE GRADE ALUMINUM, TIG WELDED.
GAS TANK ASSEMBLY INCLUDES THE FOLLOWING:
- 'MONZA' ALUMINUM Q/A FILLER CAP 2.5 INCH OPENING (63MM),
- TANK MOUNTING ANTI-VIBRATION RUBBERS (TANK TO FRAME),
- TANK PULL DOWN STRAPS X 2 (NEW ORIGINAL TANK STRAPS),
- (OPTIONAL) PET COCKS, BALL VALVE WITH QUICK RELEASE X 2,
- (OPTIONAL) ONE WAY CHECK VALVE FOR TANK BREATHER TUBE.
GAS TANK ASSEMBLY AS LISTED ABOVE:
PRICE CAN.$850.00 PLUS APPLICABLE TAXES & SHIPPING.
USE OF STOCK TZ COMPONENTS:
- THE CHASSIS KIT IS MADE TO FIT AS MANY STOCK COMPONENTS AS POSSIBLE. INCLUDING ENGINE, FRONT END, RADIATOR, SHOCK, COILS, FRONT FAIRING/TACH BRACKET, STEERING DAMPER, SEAT, FAIRING.
- THE GP LOWLINE CHASSIS DESIGN PUTS THE TANK APPROX 2.5 INCHES LOWER THAN THE STOCK TANK, THEREFORE IT CANNOT BE USED.
- THE EXPANSION CHAMBERS WILL NEED SLIGHT MODIFICATION TO FIT AT THE REAR OF THE FOOTRESTS. THIS IS DUE TO THE WIDER SWINGARM WIDTH.
THESE RACE CHASSIS KITS ARE NOT MANUFACTURED FOR USE ON PUBLIC ROADS.
SPECIFICATIONS SUBJECT TO CHANGE AND UPDATING.
CONTACT DENIS CURTIS TO DISCUSS FURTHER DETAILS: Contact Us
WE SINCERELY APPRECIATE YOUR INTEREST IN OUR PRODUCTS
|
